Mod Tree Wall Hanging TUTORIAL

20130630-194445.jpgWelcome back to Twelve MORE Weeks of Christmas! This tutorial is a fun wall hanging to help you deck the walls! I made a similar pillow last year for a swap and I've been wanting to make it a wall hanging for my house!

20130709-213255.jpgLet's get started!1. Fabric & Supplies: You need 3/4 yard of white background fabric, five 6 1/2 x 12" pieces of green, a 3 3/4 x 12" piece of brown, 1/4 yard of red for border, 7/8 yard for backing and 1/4 yard of green for binding. Additionally, you'll need 1 yard of Wonder Under or similar double sided fusible interfacing and a 30 x 30" piece of white batting.

20130709-221149.jpg2. Cutting & Fusing: Start by folding the white background in fourths (fold in half, then fold in half again). Press the folds.

20130709-222015.jpgCut the two raw edges 12 1/2" from each folded edge. You are cutting a 25" square with registration lines pressed in at 12 1/2" in both directions.

20130709-222032.jpgFuse the Wonder Under to the BACK of the five green pieces and the brown piece. Trim any excess so that all green pieces measure 6 1/2 x 12". Cut the brown piece into five pieces measuring 3/4 x 12".

20130709-222502.jpg3. Making the Trees: Mark the center lengthwise of the five green pieces.

20130709-223404.jpgCut from the center line to the corner on both sides to make a triangle. Repeat for all five green pieces.

20130709-223420.jpgTrim off the bottom of four trees to make your trees different heights. Trim 1 1/2", 2", 2 1/2" & 3". Leave the fifth tree untrimmed.

20130709-224425.jpgYou should now have five different size trees!

20130709-224441.jpg4. Attaching the Trees: Remove the paper backing from all five trees.

20130709-225521.jpgPlan your layout with a pressing board beneath; this way you won't have to transport it.

20130709-225003.jpgLay out your trees! Vary the height. The top tree should be about 2" from the top and 6" from the bottom. Leave 1 1/2" on each side.

20130709-225016.jpgMark the sides of each tree using a frixion or similar erasable marking pen.

20130709-231128.jpgPress the trees to the background.

20130709-231155.jpg5. Attaching the Trunks: Fold up the bottom of the background fabric 3" and press.

20130709-233123.jpgLay a trunk in the center of the bottom of a tree.

20130709-233521.jpgPress just the top of the trunk, leaving the rest loose.

20130709-233534.jpgTrim the bottom of the trunk even with the press line.

20130709-233553.jpgPress the rest of the trunk.

20130709-233607.jpgRepeat for all five trunks.

20130709-233627.jpg6. Adding the Borders: Trim 1 1/2" off each side and square up your piece to 22" square.

20130709-234116.jpgCut your borders. They should be 2 1/2 x 22" and 2 1/2 x 26 1/2". You'll need two of each.

20130709-234132.jpgAttach the borders.

20130709-234146.jpgPress neatly using starch. I recommend Best Press. Spray the starch on the back and press the front; this will help the starch penetrate the fabric.

20130709-234208.jpg7. Quilting & Finishing: Make your quilt sandwich of backing, batting and your top. Press the layers together.

20130709-234228.jpgBaste the quilt.

20130709-234244.jpgDon't pin through the trees or trunks. The holes in interfacing will not self heal as they do in fabric.

20130709-234251.jpgThe trees and trunks need to be stitched around the edge to secure. Use a heavier weight thread.

20130710-001700.jpgStitch around the trees using a blanket stitch (or another stitch you like!).

20130710-001712.jpgTry another stitch for the trunks! I used #83 on my Bernina.

20130710-001734.jpgQuilt. Free motion quilting or straight lines will look great! The stitching around the trees is enough if you prefer to skip this step.

20130710-001749.jpgAttach the binding.

20130710-001802.jpgAnd voila!

20130710-001813.jpgI cannot wait to see what you make!! Please add pictures to my Made with May Chappell Flickr group! See you next week!xo LC

Previous
Previous

All Sewn Up GIVEAWAY

Next
Next

Quilty Duffel